Brookstone OSIM uDevine Manual page 14

Preparation before use
Caution
• Always check to ensure that there are
no holes or tears on the backrest pad.
Stop using the uDivine immediately if
you find even the slightest tear. Unplug
the uDivine and contact Brookstone
Customer Service at 866-336-3199.
Note
• If rollers are in the middle of the backrest
when operation is terminated, they will
return to storage position when the main
power switch is turned on again.
Connecting the music source
• An audio cable with 3.5 mm plug is
mounted inside the right armrest casing,
in front of the arm massage unit. Pull it
out to connect with your music source.
• Turn on the music, following instructions
for your music player.
14
Raising/reclining
the backrest
To raise the backrest
• Press and hold the backrest button [ ]
until the backrest is lifted to the desired
angle.
To recline the backrest
• Press and hold the backrest button [ ]
and push the backrest down to the
desired angle.
Raising (extending)/lowering
(retracting) the footrest
To raise/extend the footrest
• Press and hold the footrest button [ ]
until the footrest is at the desired angle
or length.
To lower/retract the footrest
• Press and hold the footrest button [ ]
until the footrest is at the desired angle
or length.
Massage programs and selections
7. Press [OK] to proceed to the next screen listing
types of backrest massage (Kneading/Tapping/
Dual/Full Rolling/Partial Rolling; Speed/Direction/
Width adjustment of rollers).
8. Use the 4-way directional buttons to adjust and
select your desired settings. Press 'DOWN' to
select the Foot Massage function.
Note: The screen will automatically return to the
Sub-menu when no selection is made.
9. The types of foot massage will be shown
(Kneading/Vibration/Warm Air and Speed
adjustment for Kneading/Vibration).
10. Use the 4-way directional buttons to adjust and
select your desired settings. Press 'DOWN' to
select the Air Massage function.
Note: The screen will automatically return to the
Sub-menu when no selection is made.
11. The Air Massage function on various massage
areas will be shown (e.g., Upper Arm/Lower Arm/
Seat).
12. Use the 4-way directional buttons to select your
desired settings. Press [OK].
Note: The screen will automatically return to the
Sub-menu when no selection is made.
27