Massage Programs & Sections; Massage Programs And Selections - Brookstone Recover 3D Manual

Massage Programs and Selections

Automatic massage programs
You may select any automatic
massage program that best suits
your needs by pressing the
respective automatic program
button on the controller.
Note
• Keep each massage session to no
longer than 20 minutes.
• Do not massage any particular area
of the body for more than 5 minutes.
Press Power button to switch on the massage chair.
Brookstone Recover
TM
"Home" position and the LCD on the controller will light up.
If no selection is made after 3 minutes, the chair will go into
sleep mode and the LCD light will go off. Any button
pressed on the controller will wake up the controller from
sleep mode.
(Home position: Leg rest will raise slightly and backrest will
recline slightly.)
Select any of the 14 automatic programs.
(Programs listed on next page).
The massage program begins once scanning is complete.
You can adjust your desired shoulder position by pressing
the ▲ or ▼ button, within 5 seconds after scanning is
complete.
The massage progress is shown on the LCD display.
After the massage is complete, the rollers will return to their
home position and the chair will return to the Ready position.
Press the power button to exit the chair.
Remote Display Sleep Mode
NOTE: Display will go to sleep after 3 minutes. Press any
button once to wake it up. Pressing again activates the
command of that button.
3D Massage Chair will recline to its
16