Installing And Removing Components; Tools And Supplies Needed; Access Covers - NEC Express 5800/140Rb-4 Service Manual

5 Installing and Removing Components

Tools and Supplies Needed

•
Phillips † screwdriver
•
Small flat-bladed screwdriver
•
Extraction tool for processor heat sink clips（coming with the server）:
•
Antistatic wrist strap and conductive foam pad (recommended)
•
Pen or pencil
•
Equipment log (page 135)
As you integrate new parts into the system, record the model and serial number of the server system,
all installed options, and any other pertinent information specific to the server system.

Access Covers

This section includes instructions for the following:
•
Removing and installing the bezel
•
Removing and installing the rear access cover
•
Removing and installing the front access cover