NEC Express 5800/140Rb-4 Service Manual page 96

2. Configuration for Disk Array
Reconnect the item A cable which had been connected to "ch.A on Baseboard" at basic
configuration, from "ch.A on Baseboard" to "the connector on DAC card".
A
Cable names
A ULTRA 160M CABLE(104)
B BOX-34P CBL (BEND1) (BB-FRP)
C FDD CBL (025) (BB-FRP)
140RB-4 IDE SIGNAL CBL BEND1
D
E HOT-PLUG PCI 28PIN CBL (0.16M)
F FAN SIGN CBL (040) (BB-FAN)
G IPMB CBL (035) (BB-HDDBAY)
H ICMB CBL (035) (BB-ICMB BD)
I F/P USB CBL (060) (BB-FR P BD)
FRT PANEL BD SERIAL CBL (060)
J
K CA3 OPEN SENSOR CBL 040
L SCSI 3CONN TERM (160M)(001)
Part Numbers (FRU)
804-062693-501
808-744465-501A
804-062337-525
804-062050-5011
804-062719-516
804-062929-040
804-062930-035
804-062931-035
804-062932-0601
804-062933-0601
804-062937-0401
804-062989-001
Figure 51. The cable connection of Disk Array configuration
Qty. Dimensions
1 1040mm DAC – HDD Cage
1 705mm For signals of Front Panel board
1 250mm FDD signals
Signals for CDROM(master) and
1 500mm
extension devices(slave)
1 165mm For signals of HPIB
1 345mm For signals of FAN BP
1 370mm IPMB signals for HDD cage
1 355mm ICMB signals
1 595mm USB signals on Front Panel board
1 610mm COM signals on Front Panel board
1 420mm Chassis intrusion
SCSI(ch.B) on Baseboard – internal
1 640mm
peripherals
Descriptions