Start-Up Guide - Sony Bravia KDL-52W4500 Operating Instructions Manual

Start-up Guide

1: Checking the accessories
AC power cord (1)
Stand (1) and screws (4) (KDL-46W4500/40W4500
only)
Remote RM-GD004 (1)
Size AA batteries (R6 type) (2)
To insert batteries into the remote
Push and lift the cover to open.
~
• Observe the correct polarity when inserting
batteries.
• Do not use different types of batteries together or
mix old and new batteries.
• Dispose of batteries in an environmentally
friendly way. Certain regions may regulate the
disposal of batteries. Please consult your local
authority.
• Handle the remote with care. Do not drop or step
on it, or spill liquid of any kind onto it.
• Do not place the remote in a location near a heat
source, a place subject to direct sunlight, or a
damp room.
4
GB
2: Attaching the stand (for
KDL-46W4500/40W4500)
1
Place the TV onto the stand by aligning
the screw hole alignment lines over the
stand as shown.
2
Fix the TV to the stand according to the
arrow marks that guide the screw holes
using the supplied screws.
~
• This TV is very heavy, so two or more people
should place the TV on the stand.
• If using an electric screwdriver, set the tightening
torque at approximately 1.5N·m (15kgf·cm).
• When installing the TV onto the wall, follow step
1 to prevent the TV panel from falling over.