Sony Bravia KDL-52W4500 Operating Instructions Manual page 37

PC Settings
AV Set-up
4:3 Default Selects the default Wide Mode for use with the 4:3 picture.
Wide Zoom
Normal
Off
Display Area Adjusts the picture display area in 1080i, 1080p and 720p
sources when "Wide Mode" is set to "Full".
Auto
Full Pixel
Normal
Horizontal Shift Adjusts the horizontal position of the picture.
Vertical Shift
Adjusts the vertical position of the picture when "Wide
Mode" is set to "Wide Zoom", "Zoom".
Vertical Size Adjusts the vertical size of the picture when "Wide Mode" is
set to "Wide Zoom", "Zoom".
Wide Mode Sets "Wide Mode" for displaying pictures from your PC.
Full 1
Full 2
Reset Resets all PC screen settings to factory settings.
Auto Adjustment Automatically adjusts the display position and phase of the
picture when the TV receives an input signal from the
connected PC.
z
• "Auto Adjustment" may not work well with certain input
signals. In such cases, manually adjust "Phase", "Pitch" and
"Horizontal Shift".
Phase Adjusts the phase when the screen flickers.
Pitch
Adjusts the pitch when the picture has unwanted vertical
stripes.
Horizontal Shift Adjusts the horizontal position of the picture.
Power Switches the TV to standby mode if no signal is received for
Management 30 seconds.
Video Labels Assigns a name to equipment connected to the side and rear
jacks. The name appears briefly on the screen when you
select the equipment. You can skip input sources from
connected equipment that you do not want displayed on the
screen.
1
2
Equipment
labels
Enlarges the 4:3 picture to fill the 16:9
screen, keeping the original image as
much as possible.
Displays conventional 4:3 picture in the
correct proportion.
Keeps the current "Wide Mode" setting
when the channel or input is changed.
During digital broadcasts, displays
pictures in accordance with the settings
recommended by the broadcast station.
Displays the original picture area.
Displays pictures in their recommended
size.
Enlarges the picture to fill the vertical
display area, while maintaining its
original proportion.
Enlarges the picture to fill the display
area.
Press F/f to select the desired input source, then press
.
Press F/f to select the desired option, then press
Uses preset labels to assign a name to
connected equipment.
.
37
(Continued)
GB