Start-Up Guide; Checking The Accessories; Inserting Batteries Into The Remote; 1: Attaching The Stand - Sony Bravia KLV-52W450A Operating Instructions Manual

Start-up Guide

Checking the
accessories
AC power cord
Stand (1) and screws (4) (For KLV-46W450A/
KLV-40W450A)
Remote RM-GA011 (1)
Size AA batteries (R6 type) (2)
Inserting batteries into
the remote
Push and lift the cover to open.
• Observe the correct polarity when inserting
batteries.
• Do not use different types of batteries together or
mix old and new batteries.
• Dispose of batteries in an environmentally
friendly way. Certain regions may regulate the
disposal of batteries. Please consult your local
authority.
• Handle the remote with care. Do not drop or step
on it, or spill liquid of any kind onto it.
• Do not place the remote in a location near a heat
source, a place subject to direct sunlight, or a
damp room.
4
GB

1: Attaching the stand

B
For KLV-46W450A/KLV-40W450A
1
Place the TV onto the stand by aligning the
screw hole alignment lines over the stand
as shown.
2
Fix the TV to the stand according to the
arrow marks that guide the screw holes
using the supplied screws.
• This TV is very heavy, so two or more people
should place the TV onto the stand.
• If using an electric screwdriver, set the tightening
torque at approximately 1.5N·m (15kgf·cm).