Disassembly; Adjustment Cover; Lens Hood [For Dz-Gx3300E/Gx3200E/ Bx37E/Bx35E/Mv4000E] - Hitachi DZ-GX3300E Service Manual

Disassembly and Reassembly > Disassembly

5-3 Disassembly

Information:
1) Even if the shapes of parts are different, the following disassembly procedure, using the DZ-
GX3300E or DZ-GX3200E, is the same for all models.
2) Numbers in the disassembly procedure diagrams are step numbers of disassembly procedures,
and letters in brackets [ ] show the types of screw.

(1) Adjustment Cover

1) Open the LCD monitor section (b) in the
direction of the arrow.
2) Insert a fi ne-tipped fl at-bladed screwdriver
(c) into the groove in adjustment cover (a),
and remove the cover from L case (d) in the
direction of the arrow: Be very careful not to
scratch the cover or L case with screwdriver.
(2) Lens Hood
[For DZ-GX3300E/GX3200E/
BX37E/BX35E/MV4000E]
1) Turn the lens hood (a) in the direction of the
arrow to remove it.
(b)
1)
2)
(c)
(a) Adjustment cover
(b) LCD monitor section
(c) Flat-bladed screwdriver
(d) L case
(a) Lens Hood
1)
(a)
5 - 3
(d)
(a)
Fig. 5-3-1
Fig. 5-3-2