System Resetting/Resetting Camera Functions; List Of Items To Be Reset - Hitachi DZ-GX3300E Service Manual

Troubleshooting > System Resetting/Resetting Camera Functions

4-7 System Resetting/Resetting Camera Functions

The DVD video camera/recorder has two types of reset function: "System reset" and "Resetting
camera functions". The reset operation will return the various settings to the defaults when the
DVD video camera/recorder was shipped form factory.

4-7-1 List of items to be reset

Table 4-7-1 shows the items that will be reset to defaults at the factory by the two types of reset
operation: "system reset" and "resetting camera functions". Check the settings of the received
device.
Use the memo column in the table to enter the settings of any received device.
(1) Procedure for checking settings
1) Set the power switch to "OFF" and use a battery or the AC
adapter/charger to power the DVD video camera/recorder.
2) Insert a DVD-RAM, and then set the power switch to "VIDEO".
For subsequent steps, operate the DVD video camera/recorder
while viewing the LCD monitor or viewfi nder.
3) Press the MENU button and make sure that "Menu: Full Menu"
is specifi ed on the Camera Functions Setup menu screen.
If "Menu: Quick Menu" is specified, use the
buttons to set it to "Full Menu".
4) Operate the /
the record function setup, date function setup, EVF/LCD setup
and initial setup, in sequence, making sure of the settings.
At this time, the items on photo quality, external photo input
and self-timer will not appear, since they are related to photo
recording: Check them in steps 6) and 7).
5) Set the power switch to "CARD PHOTO". It is not necessary to
insert a card at this time.
6) Press the MENU button to display the camera function setup
screen, and then operate the
the record function setup screen in order to check the settings
on fl ash (DZ-GX3300E only), photo quality, external photo input
and self-timer.
7) After checking is complete, press the MENU button to restore
the ordinary screen.
/ / buttons to display the screens for
/ / /
4 - 38
/ / / and
buttons to display
Fig. 4-7-1 Example of setup
screens