Special Functions; Dvd-Ram/Dvd-Rw/+Rw - Hitachi DZ-GX3300E Service Manual

Troubleshooting > Special Functions

4-8 Special Functions

Restriction:
The information included in this section is exclusively for service personnel: Do not disclose it to
persons other than service engineers.
4-8-1 Forced initialization of DVD-RAM/DVD-RW/+RW
(1) Application/Symptom
Perform this procedure when Disc Navigation does not start normally and initialization is not
possible with the procedure explained in instruction manual.
(2) Procedure
Note:
1) Initialization will delete all data on disc: Copy any necessary fi les to PC, etc.
2) Do not turn power off or remove the disc during initialization: Such an interruption will make
the disc unusable.
1) Use the AC adapter/charger to power the DVD video
camera/recorder, and set the power switch to "Movie" or
"Disc Still".
Do not use a battery for initializing disc: If power
is interrupted during work, the disc could become
unusable.
2) Make sure that the DVD-RAM/DVD-RW/+RW to be
initialized is free from dirt or scratch: If the disc is dirty
or scratched, normal initialization may be impossible.
3) Insert the DVD-RAM/DVD-RW/+RW to be initialized.
4) After the disc is recognized, operate the following
buttons to display the disc formatting screen (Fig. 4-8-1):
Hold down the SELECT, REC and + (plus)
buttons simultaneously for at least 3 seconds.
5) Use the / /
press the button. With DVD-RAM/+RW, initialization
will start and message "Formatting ..." will appear.
With DVD-RW, the screen for choosing the recording
mode (VR or VF) will appear.
6) With DVD-RW, press the
choose the recording mode, and then press the
button: Initialization will start and message "Formatting
..." will appear.
7) When formatting is complete, message "Finished" will
appear for several seconds, and then the normal screen
will automatically be restored.
/
buttons to choose "YES" and
/ / / button to
Fig. 4-8-1 Screen for Disc Formatting
4 - 42