Setting Of Led Head Drive Time - OKIDATA OL1200ex Service Manual

%4.2.1 Setting of LED head drive time

4.2.1 Setting of LED head drive time
Note: When the luminous intensity marking of the replaced LED head (new part) is same as that of
the used LED head (old part), do not set the LED head drive time.
• Luminous intensity marking label
#####
• Setting of LED head drive time
Drive time of the LED head is to set parameter of drive time setting values corresponding to the
lumious intensity displays marked on the LED head to EEPROM.
a. Corresponding table of lumious energy display and drive time parameter
Luminous intensity
display on LED
0.27 ~ 0.28
0.29 ~ 0.30
0.31 ~ 0.32
0.33 ~ 0.35
0.36 ~ 0.37
0.38 ~ 0.40
0.41 ~ 0.43
0.44 ~ 0.46
0.47 ~ 0.49
0.50 ~ 0.52
0.53 ~ 0.57
0.58 ~ 0.60
0.61 ~ 0.64
0.65 ~ 0.69
0.70 ~ 0.73
0.74 ~ 0.79
0.80 ~ 0.84
0.85 ~ 0.90
0.91 ~ 0.96
Drive time
parameter
head
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7