Stihl Cutquik TS 410-A Technical Information page 9

Technical Information 19.2010
5.8.2 Solenoid Valve
A
1
2
3
Generator wire
Route the cable starting at the generator in the
direction of the solenoid valve (see b 5.8.1).
. Insert bushing (1)
. Insert shrink tube as far as it will go (A)
. Press in and/or insert wires (2) in the marked
locations (arrows)
. Connect the generator plug (3) to the solenoid
valve
Short circuit wire
Route the short circuit wire starting at the air baffle
in the direction of the solenoid valve (see b 5.8.3).
. Insert bushing (4)
. Press in and/or insert short circuit wire (5) in the
marked location (arrow)
. Connect the plug (6) of the short circuit wire to
the solenoid valve
TI_19_2010_30_01_01.fm
4
5
6
5.8.3 Air Baffle
1
A
Short circuit wire
. Insert the blue shrink tube (1) into the air baffle
as far as it will go (A)
. Press in and/or insert short circuit wire (2) in the
marked locations (arrows)
. Slide the bushing (3) over the black shrink tube
Page 9
2
3