Stihl Cutquik TS 410-A Technical Information page 10

Page 10
5.8.4 Shroud
Plug connection short circuit wire / control
panel
. Press in and/or insert plug connection/wire in
the marked locations (arrows)
Control panel
Route the cable starting at the control panel in the
direction of the plug connection to the short circuit
wire.
. Press in and/or insert plug wires in the marked
locations (arrows)
Technical Information 19.2010
5.9 Tightening torques
Part(s)
Cap / tank housing
Generator /
crankcase
Solenoid valve / tank
housing
Cap / shroud
Ground wire /
crankcase
Hose connector /
solenoid
Additional tightening torques are listed in the
Service Manual for the STIHL Cutquik
TS 410, 420.
5.10 Service notes
Service and repair procedures are included in the
Service Manual STIHL Cutquik
Thread Tightening
torque
P 6x19 6 Nm
M 4x12 3 Nm
P 6x19 6 Nm
M 5x17 4.5 Nm
M 4x12 3 Nm
G 3/8" 3 Nm
®
®
TS 410, 420.
TI_19_2010_30_01_01.fm