Stihl Cutquik TS 410-A Technical Information page 2

Page 2
The generator ensures that power is supplied to the
solenoid when the engine is running.
Using the buttons of the ergonomically arranged
control panel, the user can adjust both the water
flow rate as well as manually activating and
deactivating the water control.
Technical Information 19.2010
1.1.1 Before starting work
. While the engine is switched off: Familiarize
yourself with the sequence of motions
. All of the control panel buttons can be operated
with the thumb of the right hand – the right hand
always remains on the rear handle during
operation
. The left hand always remains on the handlebar
1.1.2 Control Panel
When the engine is running, it is possible to activate
/ deactivate the electronic water control and adjust
the water flow.
3
1 Button (+):
Activate the electronic water control or increase
water flow to cutting wheel
2 Button (–):
Activate the electronic water control or decrease
water flow to cutting wheel
3 Deactivate electronic water control; no water is
fed to the cutting wheel
1
2
TI_19_2010_30_01_01.fm