The Control Panel - Logik L612WM13 Instruction & Installation Manual

The Control Panel

Programme Dial
Different wash
programmes can be
selected according to your
wash requirements.
Favorite
Power Button
Press to turn on the
machine.
Press and hold
to turn off the
machine.
• If you need to change a setting after the wash has started, turn the power OFF then
ON again. Re-select the programme, spin speed and optional functions, and then
press the Start / Pause button. (Ensure the Child Lock is off, otherwise the original
programme will continue.)
• Water is poured into the washing machine to perform an inspection at the time of
shipment from the factory, so there may be drops of water or condensation in the
washing machine. This is not an indication of a malfunction.
During initial start-up and use of the unit, there may be a slight smell
while the motor is settling in. This is not a fault; this is normal operation.
LED Display
• The delay light will be on to indicate the delay time. It will start the programme
after the selected hours.
• After the wash procedure begins, REMAIN will be illuminated, to display the
remaining time, that is , the wash finishing time.
• When the child lock function is selected CHILD LOCKED will be illuminated.
• When the door is at the lock state, DOOR LOCKED will be illuminated. The door
can be opened only after the light turns off.
Express 15'
Eco
Delay Button Spin Speed
Button
This button is used
to delay the wash.
Select the desired spin
Press continuously
speed of the selected
to select the time
wash programme -
you want to start
you can also select
the wash.
Rinse Hold
Less consumption.
More efficiency.
Press 3 sec. for Signal / Favorite
Start/Pause
Temperature Start/Pause
Button Button
Press to select the Press to start your
desired temperature. wash. Press while
when a temperature is in operation to
set the indicator LED. pause your wash.
(If no temperature
indicator is lit, the
water temperature is
cold)
13