Programming; Programming Codes - AT&T Merlin Plus User's Card Manual

PROGRAMMING

Follow these steps to program features onto your voice ter-
minal. For more information about programmable features,
see Section 5, "Reference," in the System Manual.
1.
Label the button you want to program.
2. Slide the T/P (Test/Program) switch to P.
The voice terminal rings every 5 seconds.
3. Touch the button you want to program.
4. Dial the feature's programming code and any other re-
quired numbers.
5. Slide the T/P switch to the center position.
Feature Name
Auto Intercom
Do Not Disturb
Group Page
Last Number Redial
Loudspeaker Page
Manual Signaling
Outside Auto Dial
Personal Speed Dial
(does not require a
button)
Privacy
Saved Number Redial
System Speed Dial
MERLIN is a registered trademark of AT&T
Copyright © 1986 by AT&T
Printed in the United States of America

Programming Codes

*91 + intercom number
*71
Dial *91 + one of these
codes:
70 for all voice
terminals
71 for group 1
72 for group 2
*73
Dial *91 + 6
*6 + intercom number
*90 + outside number
Personal Speed Dial
code (#01 through #22)
+ *90 + outside number
*72
*74
*95 + System Speed Dial
code (60 through 99)