Attach Pendant To Pipe And Tighten - Bosch VG5 600 Series Installation Manual

AutoDome 600 Series Analog PTZ Camera
3.9

Attach Pendant to Pipe and Tighten

1.
2.
1
2
2a Dome Cap
2b Recessed Hinge Pin
2c
3
4
Bosch Security Systems, Inc.
Before attaching the Pendant, visually inspect the Pendant dome and the Interface Board
connectors for any blocked pin holes and bent pins.
Tilt the Pendant enough to place its mounting hook on top of the its housing, over the
recessed hinge pin of the Dome Cap.
Figure 3.14 Pendant to Roof / Pipe Mount Attachment
Tilt Dome
Hook and drop
Dome Connector
Rotate down to engage dome connector
Tighten the two (2) mounting screws to a minimum torque of 10-12 N-m (90-105 in.-lbs)
Installation Manual
Installing the Roof Parapet and Pipe Mounts | en
a
b
c
F.01U.265.793 | 2.0 | 2012.02
55