Panasonic KX-NSX2000 Operating Manual page 63

•
If Automatic Call Hold has been preprogrammed, you can put the current call on hold
automatically by pressing another CO, ICD Group, INTERCOM, or DN button to make or
answer another call.
•
For the Call Hold Retrieve operation using a PDN/SDN button, refer to "1.5.1 Primary
Directory Number (PDN)/Secondary Directory Number (SDN) Extension".
Holding in a System Parking Zone (Call Park)
You can put a call on hold in a common parking zone of the PBX so that any extension can retrieve the
parked call. You can use this feature as a transferring feature.
A call can be put into either a specified parking zone (Specified) or any idle parking zone (Auto). If a Call
Park button and Call Park (Automatic Park Zone) button have been established, you can select either way
to park by simply pressing the corresponding button.
When a call is parked automatically, or more than one call has been parked at the same time, you need to
specify the parking zone number to retrieve the required call.
To set
PT/PS
During a conversation
(Call Park)
Press Call Park.
PT/PS
During a conversation
Press TRANSFER.
5 2
Enter 52. Enter a specified parking
zone number (2 digits) or press
automatically.
If you hear a busy tone, enter another
parking zone number or press
parking zone no.
Specified
OR
Auto
to park at an idle parking zone
again.
1.4.2 Holding a Call
C.Tone
On-hook.
Operating Manual 63