3.1.2 Settings on the Programming Mode
Item
One-touch Dialling
Assignment Mode
Selection
Do you prefer to set the One-
touch dialling only?
Not available for a PS.
*1
Only available for IP-PTs (except KX-NT321)/KX-DT343/KX-DT346/KX-DT543/KX-DT546 telephones.
*2
This setting applies to both outside and intercom calls. For intercom calls, this feature must be enabled through system
*3
programming.
Only available for certain digital proprietary telephones.
*4
Only available for IP-PTs and certain digital proprietary telephones.
*5
Only available for KX-NT300 series (except KX-NT321)/KX-NT560/KX-DT343/KX-DT346 telephones.
*6
Registering and cancelling a Bluetooth wireless headset may take time. Please avoid any interruption during that time by, for
*7
example, going off-hook.
CAUTION
There is a risk that fraudulent telephone calls will be made if a third party discovers your
password (extension PIN).
The cost of such calls will be billed to the owner/renter of the PBX.
To protect the PBX from this kind of fraudulent use, we strongly recommend:
a.
b.
c.
•
After the programme number is entered, the programme title is displayed.
The programming screen can be changed with the Navigator Key (Up or Down).
•
You can select the parameter with the Navigator Key (Up or Down) instead of entering a
number.
260
Operating Manual
Programming
Input
#
Keeping your PIN secret.
Selecting a complex, random PIN that cannot be easily guessed.
Changing your PIN regularly.
Selection & Parameter
No—Normal (Any Flexible
0
buttons can be modified.)
Yes—Only One-touch
dialling buttons can be
1
modified. However, to modify
them, there is no need to enter
"2" before the number.