Panasonic KX-NSX2000 Operating Manual page 227

1.
Log in to the System Manager's mailbox.
2.
5 1
3.
Enter the mailbox number.
4.
to delete the mailbox.
1
•
The System Manager password cannot be reset here. The System Administrator can reset
the System Manager password using Web Maintenance Console.
•
After the password is reset, if the System Administrator has set "Default Password for New
Mailboxes" to "Enable", the password will be set to the default password. If set to "Disable",
the mailbox will have no password.
Setting Class of Service (COS) Parameters
A Class of Service (COS) defines the set of system services available to the mailboxes assigned to it. There
are 514 Classes of Service; the Class of Service number is automatically assigned to the mailbox when
configured in the User Container. COS numbers 1 to 512 are assigned to general users. COS No. 513 and
No. 514 are assigned by default to the Message Manager and the System Manager respectively.
•
If the Unified Messaging system is being programmed via Web Maintenance Console, the
System Manager cannot set COS parameters. The system will announce, "Sorry, this
function is not available".
To set COS parameters
Follow the steps detailed below to set the following Class of Service parameters:
Log in to the System
Manager's mailbox.
Parameters
Personal Greeting Length
New Message Retention
Time
2
5 2
Enter 52.
1.
*1
1
2
2. Enter the greeting length (1–360 s).
3.
2
1.
1
2
2.
Enter the retention time (a maximum of 30 days or 0: Unlimited).
3.
2
class of
service no.
Enter the class of
service number (1–512).
Steps
to change the greeting length.
to accept the current setting, then go to the next parameter.
to accept.
to change the retention time.
to accept the current setting, then go to the next parameter.
to accept.
2.2.1 System Manager Features
Follow system prompts
and set each
parameter below.
Operating Manual 227