1.2.3 Redial
1.2.3 Redial
This is convenient when calling the same outside party again.
–
Redialling the Last Number You Dialled (Last Number Redial)
Redialling the Last Number You Dialled (Last Number Redial)
PT/SLT/PS/SIP Extn.
Off-hook.
Press REDIAL or enter #.
SIP Extn.
Off-hook.
•
Up to 32 digits can be stored and redialled.
•
After pressing REDIAL, if you hear a busy tone again, press REDIAL to retry.
•
If you want to log outgoing intercom calls to the outgoing call log, consult your System
Installer.
•
If you have seized a trunk, pressing the REDIAL button will be ignored if the last number
you dialled was an extension.
•
Automatic Redial
To redial automatically, press the SP-PHONE button and then the REDIAL button, or
press the REDIAL button directly. It will keep trying the busy number until the called party
answers or until a specified timeout.
You can perform other tasks during dialling. To cancel, press the FLASH/RECALL button.
Some outside lines may not support this feature.
This feature is not available for the PS.
1.2.4 When the Dialled Line is Busy or There is No Answer
–
Reserving a Busy Line (Automatic Callback Busy)
–
Setting Callback on an ISDN Line (Completion of Calls to Busy Subscriber [CCBS])
–
Sending a Call Waiting Notification (Call Waiting)
–
Leaving a Message Waiting Indication/Calling Back the Caller Who Left an Indication (Message
Waiting)
32
Operating Manual
OR
OR
REDIAL
Press REDIAL.