Minolta Bizhub 36 Installation Manual page 6

4. Remove the imaging unit (IU) by placing your fin-
gers under the hooks on its right and left sides,
and pulling it toward you.
5. Remove screws that secure the drum unit in posi-
tion. (Two silver screws each on the right and left
sides)
Drum unit
6. Detach the drum unit upward while slightly bend-
ing open its lower part (the shaded portion).
Note:
• Do not touch or scratch the photo conductor.
• Cover the drum unit, which has been removed,
with a protective cloth or similar tool.
Drum unit
A3EW11A015BA
Developing unit
A3EW11A017AA
Developing unit
A3EW11A017BA
E-6
7. Remove the developing unit cover.
(Three screws)
8. Remove the toner supply port.
9. Remove the supplied sheets of mylar from the
paper backing.
A1UDIXC011DA
4040IXC078DA
A1UDIXC048DB