Table of Contents
Advertisement
8.8.1 Page selection
Use the numeric keypad keys 0 to 9 to enter the 3-digit page number of the
>
teletext page you want.
Use the coloured function keys to call up the pages displayed in the respective fields.
>
8.9 HbbTV
HbbTV (Hybrid broadcast broadband TV) is a technology that enables broadcast and
Internet content to be linked. This enables access to interactive added-value services
and multimedia offerings from programme providers.
The
symbol in the Infobox indicates that the programme provider is offering an HbbTV
application.
Display and use of the HbbTV application is determined by the data received.
Generally it is basically operated as described below.
>
Switch to a channel that is broadcasting HbbTV data.
This is indicated via the
appears at the lower right of the screen indicating the availability of HbbTV content.
Launch the HbbTV application by pressing the red function key.
>
Depending on the speed of the Internet connection, there may be slow response times
or short interruptions.
In the HbbTV application you can use the arrow keys or the keys displayed there to
>
move the highlight.
You can use the OK button to confirm the highlighted item and call this up, as long as
>
the highlighted item has additional subitems.
You can exit the HbbTV application by pressing the Back button or by pressing the
>
colour button displayed in the application itself.
During operation please be sure to take note of messages and displays on the screen.
8.10 Subtitles
When switching to a programme being broadcast with subtitles, the subtitles symbol
appears in the Info box.
Using the options selection, under the Subtitles menu item, you can select
>
subtitles when you want to display them.
8.11 Picture zooming
By pressing the Zoom/Format key you can switch between the various predefined
>
formats (original, optimum, optimum 16:9, full screen and stretch).
>
Repeat this process to switch off the zoom.
The zoom function remains enabled until you switch it off again or switch the receiver to
standby mode.
8.12 PiP function (picture in picture)
Your receiver has a so-called PiP function (PiP = Picture in Picture). You can use this to
display an additional minimised picture in the main picture (PiP).
symbol in the Info box. After a few seconds the box
27
Advertisement
Table of Contents
