Table of Contents
Advertisement
7.1 Switching the device on/off
When the receiver is on standby, you can switch it on by pressing the On/Standby
>
button on the remote control/device.
>
When operating normally you can switch the device to standby mode by pressing the
On/Standby button.
7.2 Calling up the main menu and navigating through the menus /
functions
The following example will illustrate how you reach the main menu and call up a submenu.
The objective of the example is to call up the Picture settings menu.
Press the Menu button. The main menu appears on the screen.
>
Select the Settings menu item by moving the highlight over this item using the arrow
>
keys.
Press the OK button to open the Settings menu.
>
17
Advertisement
Table of Contents
