Audio - Panasonic AJ-SDa755E Operating Instructions Manual

CONTENTS
Setup menus
USER menu
<AUDIO>
No./Item
701 This selects the audio input (CH1) reference
level switching.
CH1 IN LV
0000 4dB
0001 0dB
0002 –20dB
702 This selects the audio input (CH2) reference
level switching.
CH2 IN LV
0000 4dB
0001 0dB
0002 –20dB
706 This selects the audio output (CH1) reference
level switching.
CH1 OUT LV
0000 4dB
0001 0dB
0002 –20dB
707 This selects the audio output (CH2) reference
level switching.
CH2 OUT LV
0000 4dB
0001 0dB
0002 –20dB
711 This selects the audio monitor output (Lch)
reference level switching.
MONIL OUT
LV 0000 4dB
0001 0dB
0002 –20dB
712 This selects the audio monitor output (Rch)
reference level switching.
MONIR OUT
LV 0000 4dB
0001 0dB
0002 –20dB
713 This selects whether or not to couple the
volume level of the audio monitor output with
MONI OUT the volume control of the headphone jack.
0000 UNITY :
Volume is output at a fixed level, regardless of
the position of the volume control.
0001 VAR :
Audio monitor output volume is coupled to the
volume control.
715 This selects the CH1 input when USER SET
has been selected by pressing the unit's
CH1 IN SEL AUDIO input selector button.
0000 ANA : Analogue input.
0001 DIGI : Digital input.
716 This selects the CH2 input when USER SET
has been selected by pressing the unit's
CH2 IN SEL AUDIO input selector button.
0000 ANA : Analogue input.
0001 DIGI : Digital input.
The underlined items indicates the initial setting.
48 (E)
Description No./Item
719 This selects the CH1 and CH2 digital input
when USER SET has been selected by pressing
DIGI IN SEL the unit's AUDIO input selector button.
0000 AES : AES/EBU input
0001 SIF : SDI input
<Note>
When no optional board (AJ-YA755G) has been
installed, setup menu No. 719 is not displayed.
721 This selects the monitor output.
MONI CH SEL 0000 MANU :
The output signal is as selected in MONITOR
SELECT buttons.
0001 AUTO :
PCM AUDIO output is selected within the
–0.43 (–0.5)a to +1a speed range; CUE is
automatically selected for all other tape
speeds.
<Note>
The value for the DV/DVCAM tape is shown in
parenthesis (
0002 PCM :
The PCM AUDIO signal is output over the
–10a to +10a range.
<Note>
This setup menu's setting takes effect when CH1
or CH2 has been selected by the L and R
MONITOR SELECT buttons on the front panel. (If
CUE has been selected, the cue signal will be
output at all the speeds regardless of the setup
menu's setting.)
722 This selects the input signal to be recorded
on the audio CH1 track.
REC CH1
0000 CH1 : Audio input CH1 signal.
0001 CH2 : Audio input CH2 signal.
0002 CH1+2 : Mixed audio input CH1 and CH2
723 This selects the input signal to be recorded
on the audio CH2 track.
REC CH2
0000 CH1 : Audio input CH1 signal.
0001 CH2 : Audio input CH2 signal.
0002 CH1+2 : Mixed audio input CH1 and CH2
726 This selects the input signal recorded in CUE.
REC CUE 0001 CH1 : Audio CH1 input
0002 CH2 : Audio CH2 input
0003 CH1+2 : Audio CH1 and CH2 MIX signal
727 This selects the processing method for the
audio edit points (IN point, OUT point) during
PB FADE playback.
0000 AUTO : According to the status during
0001 CUT : Forced CUT
0002 FADE : Forced FADE
Description
).
signal.
signal.
recording.