Time Code - Panasonic AJ-SDa755E Operating Instructions Manual

CONTENTS
Setup menus
USER menu
<TIME CODE>
No./Item
500 For selecting whether to output the VITC
signal at the positions selected by setup
VITC BLANK menu items No. 501 (VITC POS-1) and No. 502
(VITC POS-2).
0000 BLANK : VITC signals are not output.
0001 THRU : VITC signals are output.
501 This sets the position where the VITC signal
is to be inserted.
VITC POS-1
0000 7L
: :
0004 11L
: :
0015 22L
<Note>
The same line as the one used for the setup
menu items No. 502 (VITC POS-2) and No. 662
(UMID POS) setting cannot be set.
502 This sets the position where the VITC signal
is to be inserted.
VITC POS-2
0000 7L
: :
0006 13L
: :
0015 22L
<Note>
The same line as the one used for the setup
menu items No. 501 (VITC POS-1) and No. 662
(UMID POS) setting cannot be set.
503 This selects the signal to be regenerated
when the time code generator (TCG) in the
TCG REGEN REGEN mode.
0000 TC&UB :
Both the time code and user bit are
regenerated.
0001 TC :
Only the time code is regenerated.
0002 UB :
Only the user bit is regenerated.
504 This selects whether the time code is to be
regenerated during automatic editing using
REGEN MODE the unit's control panel.
0000 AS&IN :
Time code is regenerated with assemble or
insert editing.
0001 ASSEM :
Time code is regenerated with assemble
editing.
0002 INSRT :
Time code is regenerated with insert editing.
0003 SW :
Setting complies with TCG switch setting.
The underlined items indicates the initial setting.
44 (E)
Description No./Item
505 This selects the time code to be used when
an external time code is to be used.
EXT TC SEL
0000 LTC :
The LTC of the TIME CODE IN connector is
used.
0001 VITC :
The VITC of the input video signal is used.
506 This sets the usage status of the user bit of
the time code generated by the TCG.
BINARY GP
0000 000 :
NOT SPECIFIED (character set not specified)
0001 001 :
ISO CHARACTER (8 bits character set based
on ISO646, ISO2022)
0002 010 : UNASSIGNED 1 (undefined)
0003 011 : UNASSIGNED 2 (undefined)
0004 100 : UNASSIGNED 3 (undefined)
0005 101 : PAGE/LINE
0006 110 : UNASSIGNED 4 (undefined)
0007 111 : UNASSIGNED 5 (undefined)
507 This selects whether to control the phase
correction of the LTC which is output from
PHASE CORR the TIME CODE OUT connector.
0000 OFF :
Phase correction control is not performed.
0001 ON :
Phase correction control is performed.
508 This selects whether the CF flag of the TCG is
to ON.
TCG CF FLAG
0000 OFF : CF flag is OFF.
0001 ON : CF flag is ON.
510 This is used to switch the phase of the time
code, which is output from the TIME CODE
TC OUT REF OUT connector, for the external LTC input
when the TCG switch is at the EXT position.
0000 V OUT :
Time code is synchronized with output video
signal.
0001 TC_IN :
Time code is synchronized with external time
code input.
Description