Panasonic AJ-SDa755E Operating Instructions Manual page 38

CONTENTS
Setup menus
USER menu
<OPERATION>
No./Item
109 This selects whether to rewind the tape
automatically to the tape start when the tape
AUTO REW end is detected.
0000 OFF : The tape stops at the tape end.
0001 ON : The tape is rewound to the tape
110 This selects whether the VTR is to stop
automatically when the counter value reaches
MEMORY "0" during a fast forwarding or rewinding
STOP operation in the CTL mode.
0000 OFF : The VTR does not stop.
0001 ON : The VTR stops automatically.
<Notes>
OThe stop mode concerned is either the stop or
the still-picture (SHTL STILL or SLOW STILL)
mode depending on the setup menu No. 315
(AFTER CUE-UP) setting.
OWhen both the AUTO REW function and
MEMORY function have been selected at the
same time, the AUTO REW function takes
precedence.
Memory stop function
Zero
point
REW
3
button
FF
4
button
! When the FF button is pressed, the VTR performs the regular fast
forward operation since the zero point is not located in the
direction of operation.
@ When the REW button is pressed, the PREROLL lamp lights (the
SHTL lamp lights as well), the VTR proceeds with the preroll
operation, and it automatically stops when it reaches the position
where the counter reads "0."
# When the REW button is pressed, the VTR performs the regular
rewinding operation since the zero point is not located in the
direction of operation.
$ When the FF button is pressed, the PREROLL lamp lights (the
SHTL lamp lights as well), the VTR proceeds with the preroll
operation, and it automatically stops when it reaches the position
where the counter reads "0."
The underlined items indicates the initial setting.
38 (E)
Description
start.
The MEMORY STOP function
does not work if it is activated
within a range of 0 ± 2 frames.
FF
1
button
REW
2
button
No./Item
111 This selects the output picture in the
STANDBY OFF (HALF LOADING) and EJECT
FRZ MODE modes.
SEL
0000 DIS :
The video output is muted.
0001 STB OFF :
When the STANDBY OFF (HALF LOADING)
mode is established, the picture being played
back at the time is frozen and output.
0002 SOF&EJ :
When the STANDBY OFF (HALF LOADING)
or EJECT mode is established, the picture
being played back at the time is frozen and
output.
<Notes>
OFreeze status complies with the setup menu
item No. 605 (FREEZE SEL) setting.
OIn the EJECT mode, freeze is output only when
BLACK, BLACK1, GRAY or GRAY1 is selected
as the setup menu item No. 105 (AUTO EE
SEL) setting.
112 This selects whether video input switching
using the INPUT SELECT button is to be
V IN SEL INH enabled or disabled.
0000 OFF :
Video input switching using the INPUT
SELECT button is enabled.
0001 ON :
Video input switching using the INPUT
SELECT button is disabled.
0002 REC :
Video input switching using the INPUT
SELECT button after the unit has been
transferred to a recording (but not editing)
mode is disabled.
113 This selects whether audio input switching
using the INPUT SELECT button is to be
A IN SEL INH enabled or disabled.
0000 OFF :
Audio input switching using the INPUT
SELECT button is enabled.
0001 ON :
Audio input switching using the INPUT
SELECT button is disabled.
0002 REC :
Audio input switching using the INPUT
SELECT button after the unit has been
transferred to a recording (but not editing)
mode is disabled.
<Note>
Even when the ON or REC setting is selected to
disable audio input switching using the INPUT
SELECT button, it is still possible to set the setup
menu items No. 715 (CH1 IN SEL), No. 716
(CH2 IN SEL) and No. 719 (D IN SEL12).
Description