Hi-Fi Audio System - Panasonic NV-F65EA Operating Instructions Manual

NICAM SYSTEM (CONT'D)
Nicam/Mono Switch ^
•When a NICAM programme is being received, this switch
can be used to select the desired type of sound to be
recorded on the hi-fi audio track. This switch functions
only when the Input Signal Selector is set to 'TUNER". To
record a NICAM programme, this switch must be set to
"NICAM".
Note:
If NICAM broadcast signals are weak, the sound quality
deteriorates remarkably. When the signals are extremely
weak, the Audio Recording Mode Indicator goes off and the
FM sound is recorded on the hi-fi track irrespective of the
setting of this switch.
• If the Nicam/Mono Switch is intentionally set to
"MONO" even though a NICAM programme is
being received, the indicator(s) remain lit.
•To record the regular sound (ordinary normal
sound) on the FM audio tracks when a NICAM
programme is received, set the Nicam/Mono Switch
to "Mono".
•When a NICAM programme is received and the
sound is distorted due to inferior reception con¬
ditions, set the Nicam/Mono Switch to "Mono".
HI-FI AUDIO SYSTEM
Preparation
•Connect your VTR to the Stereo Amplifier and FM Stereo
Tuner as described on page 27.
•Tune the FM Stereo Tuner to the desired station.
Recording of Simulcast Sound
O Set the Input Signal Selector to "Simul".
The "Simul" indicator lights up.
•The operation procedure is the same as for normal
recording; see "Recording from a TV broadcast
signal" on page 24.
While this switch is in the "Simul" position, the sound
portion of the TV broadcast signal will be recorded only
on the "normal" sound track. And the stereo sound
signal received via the FM tuner will be recorded on the
hi-fi sound tracks.
Playback
(or
Monitoring during Recording)
Press the Audio Output Mode Selector (Remote Controller)
to select the desired sound mode.
At the every push of this button, the audio playback mode
changes as follows:
►Stereo—>Left^ Right-* Normal audio track
and the Left and Right Indicators show which sound mode
is selected in the following way.
Stereo: Both the Left and Right Indicators are lit.
Left: The Left Indicator is lit.
Right: The Right Indicator is lit.
Normal: Both the Left and Right Indicators are not lit.
• If a video cassette recorded on this VTR with stereo
or bilingual sound is played back on a conventional
VHS video recorder, the sound will be reproduced
from the normal audio track (in mono).
(
26
)