Video - Panasonic AJ-SDa755E Operating Instructions Manual

CONTENTS
Setup menus
USER menu
<VIDEO>
No./Item
600 This selects the internal reference signal.
INT SG 0001 BB :
The black burst is generated.
0002 CB100 :
100% colour bars are generated.
0003 CB75 :
75% colour bars are generated.
601 This selects whether to float the vertical sync
position of the video output in order to align
OUT VSYNC the video output phase with the input in the
EE/record/edit modes.
0000 N-VF : Signals are not floated.
0001 VF : Signals are floated.
602 This selects whether to mute the video output
signals when a blank on the tape has been
V-MUTE SEL detected during playback.
0000 N-MUTE : No muting. (Freeze)
0001 LOW RF : Muting. (Set to gray.)
605 This selects the freeze mode for still pictures.
FREEZE SEL 0000 FIELD : Field freeze.
0001 FRAME : Frame freeze.
<Note>
When frame freeze has been selected, the frame
slow status is established with the slow setting.
606 This selects chroma colour killer processing
for the video output signals.
OUT C KILL
0000 B/W : No colour signals are output.
0001 COLOR : Colour signals are output.
609 This selects whether to superimpose EDH
onto the SDI output signals.
EDH
0000 OFF : EDH is not superimposed.
0001 ON : EDH is superimposed.
<Notes>
OEven when ON is selected for this setting, EDH
is not superimposed onto the signals output
from the SDI OUT 3 connector if the SUPER
switch on the front panel of the unit is set to
ON.
OWhen no optional board (AJ-YA755G) has
been installed, setup menu No. 610 is not
displayed.
The underlined items indicates the initial setting.
46 (E)
Description No./Item
611 This selects Y/C separation processing for
the composite input signals.
YC SEP MODE
0000 B/W :
The signals are processed as B/W signals.
0001 AUTO :
The signals are automatically detected.
618 This selects the interpolation operation.
Vertical interpolation is conducted automatically
INTERPOLATE during slow-motion playback to reduce the
vertical movement of the playback pictures.
However, this
interpolation operation to be forcibly turned off.
0000 OFF :
Interpolation is forcibly turned off.
0001 AUTO :
Interpolation is automatically turned on during
slow-motion playback.
620 This selects the operation mode for edge
subcarrier reduction (ESR) in the playback
ESR MODE circuit.
0000 OFF :
The mode is forcibly set to OFF.
0001 AUTO :
The mode is automatically set to ON or OFF
depending on the VTR operation.
645 This selects whether or not to record the
wide-screen information on the tape.
WIDE SELECT
0001 WIDE :
The wide-screen information is not recorded on
the tape.
0002 NORMAL :
The wide-screen information is recorded on the
tape.
<Note>
If SDTI/1394 has been selected as the input
signals using the INPUT SELECT button, the
wide-screen information on the input signals will
be recorded regardless of this menu's setting.
Description
menu item enables the