Panasonic AJ-SDa755E Operating Instructions Manual page 71

CONTENTS
RS-232C interface
5. Command table
$ Commands relating to operation control
<Notes>
O As for the return (completion) message, [ACK] is
first returned when data is received, and the
execution message is subsequently returned. It
is only the execution message which is listed in
this table.
O In the case of commands not listed in the table,
ER001 (invalid command) is returned after [ACK]
has been returned.
VTR
Send command
operation
STOP
[STX] OSP [ETX]
This command is for stopping the tape travel.
EJECT
[STX] OEJ [ETX]
This command is for ejecting the cassette tape.
The resulting output picture and sound statuses
differ according to the settings selected for the
setup menu No. 105 (AUTO EE SEL) and the
setup menu No. 111 (FRZ MODE SEL).
PLAY
[STX] OPL [ETX]
This command is for starting playback.
REWIND
[STX] ORW [ETX]
This command is for rewinding the tape.
The resulting output picture and sound statuses
differ according to the settings selected for the
setup menu No. 105 (AUTO EE SEL).
The maximum tape speed differs according to the
setting selected for setup menu No. 102 (FF.
REW MAX).
FAST
[STX] OFF [ETX]
FORWARD
This command is for fast forwarding the tape.
The resulting output picture and sound statuses
differ according to the settings selected for the
setup menu No. 105 (AUTO EE SEL).
The maximum tape speed differs according to the
setting selected for setup menu No. 102 (FF.
REW MAX).
REC
[STX] ORC [ETX]
This command is for starting the recording.
Return (completion)
message
4 5
[STX] OSP [ETX]
4 5
[STX] OEJ [ETX]
4 5
[STX] OPL [ETX]
4 5
[STX] ORW [ETX]
4 5
[STX] OFF [ETX]
4 5
[STX] ORC [ETX]
VTR
Send command
operation
SHTL
[STX] OSF:data [ETX]
FORWARD
This is the forward direction shuttle command.
data = n : speed data
0 : STILL
1 : a0.03
2 : a0.1
3 : a0.2
4 : a0.5
5 : a1
6 : a1.85
7 : a4.1 (a3.1)
8 : a9.5
9 : a16
A : a32
<Notes>
OThe a16 anda32 speed differ according to the
setting selected for setup menu No. 101 (SHTL
MAX).
OThe value for the DV/DVCAM tape is shown in
parenthesis (
SHTL [STX] OSR:data [ETX] 4 5
REVERSE
This is the reverse direction shuttle command.
data = n : speed data
0 : STILL
1 : a0.03
2 : a0.1
3 : a0.2
4 : a0.43 (a0.5)
5 : a1
6 : a1.85
7 : a4.1 (a3.1)
8 : a9.5
9 : a16
A : a32
<Notes>
OThe a16 anda32 speed differ according to the
setting selected for setup menu No. 101 (SHTL
MAX).
OThe value for the DV/DVCAM tape is shown in
parenthesis (
STANDBY
[STX] OBF [ETX]
OFF
This command is setting the VTR to standby
OFF.
STANDBY ON
[STX] OBN [ETX]
This command is setting the VTR to standby ON.
Return (completion)
message
4 5
[STX] OSF [ETX]
).
[STX] OSR [ETX]
).
4 5
[STX] OBF [ETX]
4 5
[STX] OBN [ETX]
71 (E)