Options - Oki ES9170 Quick Start Manual

Chapter 6 INFORMATION ABOUT EQUIPMENT

Options

The following options are sold separately, and upgrade the performance of the equipment if installed. For details, contact your
service technician or representative.
1.
Original Cover (KA-1640PC)
This is used to hold an original.
2.
Reversing Automatic Document Feeder (MR-
3022)
This unit automatically feeds a stack of originals one by
one to have them copied.
3.
Bridge Unit (KN-2520)
This unit acts as a relay for the Finisher and this equipment.
4.
Job Separator (MJ-5006)
Enables Faxes, copies and prints to be output onto
separate paper trays.
5.
Paper Feed Pedestal (KD-1025)
This pedestal enables you to install the Additional Drawer
Module (optional, MY-1033).
6.
Large Capacity Feeder (KD-1026)
This feeder enables you to feed up to 2000 sheets (80 g/m
or 20 lb. Bond) of A4 or LT paper.
7.
Additional Drawer Module (MY-1033)
This drawer can be added to the Paper Feed Pedestal
(optional, KD-1025). Combined with the 2 drawers in the
equipment, paper can be fed from 4 drawers in total.
68
8 9
10 12 11
13
14
5
8.
Finisher (MJ-1101)
This Finisher enables sort/group finishing and stapling.
The Hole Punch Unit (optional, MJ-6103) can be installed
in this Finisher. The Bridge Unit (KN-2520) is required for
the installation of this Finisher.
9.
Saddle Stitch Finisher (MJ-1106)
This Finisher enables saddle stitching, in addition to sort/
group finishing and stapling. The Hole Punch Unit (MJ-
6103) can be installed in this Finisher. The Bridge Unit (KN-
2520) is required for the installation of this Finisher.
10.
Saddle Stitch Finisher (MJ-1033)
This Finisher enables saddle stitching, in addition to sort/
group finishing and stapling. The Hole Punch Unit (MJ-
6008) can be installed in this Finisher. The Bridge Unit (KN-
2520) is required for the installation of this Finisher.
11.
Inner Finisher (MJ-1032)
This Finisher enables sort/group finishing and stapling
2
The Hole Punch Unit (MJ-6007) can be installed in this
Finisher.
1 2
3
4
6 7