Oki ES9170 Quick Start Manual page 71

12.
Hole Punch Unit (MJ-6008)
This unit enables you to punch holes on printed sheets.
Install it in the Saddle Stitch Finisher (MJ-1033) to use it.
13.
Hole Punch Unit (MJ-6007)
This unit enables you to punch holes on printed sheets.
Install it in the Finisher (MJ-1032) to use it.
Other options available are as follows. Contact your service technician or representative for details.
Work Table (KK-4550)
This is a small table for placing originals while the equipment is
being operated.
Installed on the right-hand side of the equipment.
FAX Unit (GD-1250)
This is a unit for using the equipment as a Fax machine.
Installed inside of the equipment.
2nd Line for FAX Unit (GD-1260)
This unit enables you to add a line to the Fax, making a 2nd line
available.
• Installed inside of the equipment.
• The FAX Unit (optional, GD-1250) is required.
Printer Kit (GM-1240)
This kit enables the printing function.
Printer/Scanner Kit (GM-2260)
This kit enables the printing and scanning functions.
Scanner Kit (GM-4240)
This kit enables the scanning function.
Desk (MH-2520)
This is a desk for the equipment.
Operator's Manual Pocket (KK-1660)
Keep the manual in this pocket.
Depending on the model, options have been already installed and the functions can be used.
14.
Hole Punch Unit (MJ-6103)
This unit enables you to punch holes on printed sheets.
Install it in the Finisher (MJ-1101) or Saddle Stitch Finisher
(MJ-1106) to use it.
Wireless LAN Module (GN-1060)
This module enables the equipment to be used in a wireless LAN
environment.
• Installed inside of the equipment.
• The Antenna (optional, GN-3010) is required.
• The equipment cannot be connected to the wireless and wired
LAN at the same time.
Bluetooth Module (GN-2020)
This module enables you to perform Bluetooth printing.
• Installed inside of the equipment.
• The Antenna (optional, GN-3010) is required.
Antenna (GN-3010)
This is used when the Wireless LAN Module or Bluetooth Module
is installed.
e-BRIDGE ID Gate(KP-2004, KP-2005)
You can log in and use the equipment simply by holding the IC
card over the Card Reader.
• Installed on the right-hand side of the equipment.
• This cannot be installed with the Work Table at the same time.
Data Overwrite Enabler (GP-1070)
This is an enabler to erase the data stored temporarily when
copying, printing, scanning, faxing, Internet Fax or network Fax
is performed. It overwrites temporarily stored data with random
data.
IPsec Enabler (GP-1080)
This enables the IPsec function in this equipment.
Meta Scan Enabler (GS-1010)
This enables the Meta Scan function in this equipment.
External Interface Enabler (GS-1020)
This enables the EWB function in this equipment.
Options
6
69