AT&T Generic 3 Quick Reference Manual page 2

4 Dial outside number, extension, or feature access
code you want to store (up to 24 digits).
NOTE: You may be able to use the softkeys to add
special functions such as Pause, Mark, Wait, or
Suppress into the telephone numbers programmed
on the AD button.
Press [
5
#
Repeat Steps 3 through 5 to program additional
6
buttons.
Hang up.
7
To place an AD call
1 Pick up handset or press [
2 Press selected AD button.
To program or reprogram an outside number,
extension, or feature access code into a
personal list
Pick up handset.
1
NOTE: For speakerphone users, press a call
appearance button or press [
2 Press softkey below Prog (if shown on the display)
or Press [
or Dial AD Program access code
3 Dial Personal List number (1, 2, or 3).
Dial list item (1, 2, 3...).
4
5 Dial number you want to store (up to 24 digits).
NOTE: You may also be able to use the softkeys
to add special functions such as Pause, Mark,
Wait, or Suppress into the programmed telephone
numbers.
Press [
6
#
Repeat Steps 4 through 6 to program additional
7
items on the same list.
8 Hang up.
To place a call using an AD list button or
access code
1
Press [
or Dial appropriate AD List access code:
List 1
].
]
Program
].
] or [
Pers List
Speaker
Speaker
] or [
Grp List
2
].
].
.
]
Sys List