Troubleshooting Of Minor Faults - Bosch Vision 800 Series Operating, Care And Installation Instructions Manual

Troubleshooting of Minor Faults

d WARNING
TO AVOID
RISK OF ELECTRIC SHOCK!
Repairs should only be carried out
by an authorized technician.
Fault
Cycle duration extended.
The door cannot be The door cannot be
opened. opened.
Door cannot be opened,
even though the appliance even though the appliance
has been switched off and
on again.
Cycle continues running,
even though the appliance
has been switched off and
on again.
Appliance cannot be
operated. "Child lock
activated" as indicated in
the display field.
Control lights do not light Control lights do not light
up. up.
Cycle does not start.
Start/Pause indicator light
flashes.
Cycle does not start. Cycle does not start.
"Check Door !" indicated in
the display field.
If repairs are necessary, and you
cannot eliminate the fault yourself with
the aid of the table below, follow these
steps:
1. Turn the cycle selector to Off.
2. Disconnect the washing machine
from the power outlet.
3.
Turn off the water faucets.
4. Call Customer Service
(refer to Page 32).
Possible cause
This is not a fault.
The suds detection feature has activated an additional
rinsing cycle to reduce the amount of suds.
This is not a fault.
The unbalance compensation system is attempting to
balance the load through repeated spins.
This is not a fault.
The laundry load may be large, requiring more time.
Child lock activated.
Power failure.
Cycle is running and/or the door is locked for safety
reasons.
Plug is loose or not inserted.
Cycle selector turned to Off before end of cycle.
Child lock activated.
For safety reasons the door has been locked because the
water level, temperature or high drum speed.
Child lock activated.
Child lock activated.
A fuse has blown. A fuse has blown.
Power failure.
Start/Pause button not pressed.
Door not closed properly. Door not closed properly.
Troubleshooting items listed below may
not be covered by warranty service!
Please carefully rule out any of these
issues before calling for service.
Action
Add a more appropriate amount of detergent.
Always load the drum with large and small items
together.
Allow additional washing time for larger loads.
Deactivate child lock; (see Page 25)
An interrupted cycle will be resumed when power is
restored. If the laundry is to be removed during a power
failure, call Customer Service (refer to Page 32).
Wait until the cycle ends (see Page 26).
Eliminate the cause.
Select a cycle.
Deactivate child lock (see Page 25).
See "Adding to the laundry/Interrupting the cycle", Page
26 .
Deactivate child lock (see Page 25).
Deactivate child lock (see Page 25).
Reset circuit breaker.
Call Customer Service if this fault recurs.
An interrupted cycle will be resumed when power is
restored. If the laundry is to be removed during a power
failure, call Customer Service (see page 32).
Press the Start/Pause button.
Check whether laundry is trapped in door.
Close the door (a click should be heard).
cycle continues.
29