Table of Contents
Advertisement
Operating Instructions
Trouble Shooting
Minor Faults
Fault
The loading door cannot
be opened.
Detergent residue in the
detergent dispenser.
The gasket is crimped.
The belt gets off the pulley.
Control lights do not
come on.
The programme
does not start.
The Ready indicator
light flashes and the
buzzer sounds.
！
Risk of electric shock
Repairs must only be carried out by our Customer Service
or an authorized technician.
If repairs are needed, and assuming that you cannot elim-
inate the fault youself with the aid the following table:
Turn the programme selector to Off .
Disconnect the washing machine from the mains.
Turn off the water tap.
Call Customer Service.
Possible cause
There is water in drum or
Rinse hold was selected.
Safety function is active.
Detergent was damp or
lumpy.
This may appears after
installing the transport
bolts.
Too much laundry is in the
drum or the laundry is put in
badly, and close the window
with excessive force.
A fuse has triggered.
Power failure.
Plug is loose or not inserted.
Loading door not closed.
,,
Start
pressed.
Action
Select Drain or Spin .
,,
Wait for 2 minutes.
Clean and dry the detergent
dispenser(refer to Page 21)
Use the dispensing aid for liquid
detergent.
Remove the transport bolts, operate
the machine for a period of time, the
gasket will return to the original shape.
Put in the laundry well and according
to the maximum load specifiction.
Switch on/replace the fuse.
Call Customer Service if this fault
is repeated.
An interrupted program will be re-
sumed when power retures. If you
wish to unload the laundry, proce-
ed as in Cleaning the drain pump ,
Page 21.
Check whether laundry is trapped
in door.
Close the loading door(a click sh-
ould be heard).
,,
button does not
Press the Start
,,
,,
,,
,,
button.
24
Advertisement
Table of Contents
