Lcd Menu Options And Special Features; Quick Overview (Spin Speed, Finish At Time, Washing Mode, Reduced Ironing, Pre-Soak, Signal, Set Clock); Signal Volume - Bosch Vision 800 Series Operating, Care And Installation Instructions Manual

LCD Menu Options and Special Features

Quick overview
The individual settings may be adjusted
to your requirements.
Spin speed Program
finish at
time**
Depends on Adjustable
cycle and
in 30 minute
model
steps
(see Page 22).
allows allows the
reduction of the
cycle finish
maximum spin
time to be set
speed achieved
** Available
by the cycle
only if clock is
See note on
set (see page
No final spin"
18)
below*
*No final spin (---") *No final spin (---")
The water is drained from the machine after the final rinse. The water is drained from the machine after the final rinse. The water is drained from the machine after the final rinse.
Recommended for delicate laundry. Use this setting to avoid Recommended for delicate laundry. Use this setting to avoid
creasing if the clothing cannot be taken out of the washing
machine immediately upon completion of the cycle.
Changing Displayed Settings
Before setting additional options,
choose a cycle with the cycle
selector.
Select settings by pressing the Menu
button and change them by pressing
the Select button.
Select the option to be changed with
the Menu" button. Press the button to
move to the next option on the display.
The active symbol starts flashing.
24
Below is a quick overview of the
adjustable settings.
Select a cycle with the cycle selector
Press the Menu button (following selections appear in sequence)
Washing Reduced
Ironing
Mode
Normal OFF
ON
Quick
quick mode a gentle spin
speed with
for lighter
subsequent
soiled items
fluffing to
and a shorter
reduce
wash time
creasing
The current active option setting is
displayed on the right.
These settings can now be changed
with the Select" button. Press the
button to jump to the next possible
setting.
Pressing the Menu" button again,
saves the previous settings.
If no button is pressed for 10
seconds the settings are saved
automatically.

Signal Volume

The acoustic signal volume is
user-adjustable. Continuous" setting
allows the signal volume to be gradually
increased by pressing and holding the
Select button in during Signal setup.
When the volume is at its maximum
level, the display switches from
Continuous" to Max. Select the
Signal by pressing the Menu button to
cycle through the menu options.
The steps for changing the settings are
described in detail below.
Pre Soak Signal
OFF OFF
ON
Continuous
Max
an integrated the acoustic
pre-soak signal
cycle for pre- indicates the
treatment of start or end of
heavily the cycle,
stained items operating
errors, or
malfunction
Press Select button until desired setting is obtained
Press Menu button for more settings
or press Start/Pause button to begin washing
Display Symbols
Symbols are only displayed in the LCD
panel if the respective setting is not
Off".
Child lock Set clock
OFF Hours/
ON minutes
allows the washer clock must be
to be secured to set before the
prevent certain cycle option
functions from finish at"
being changed time can be
inadvertently
Symbol Function
Normal
Wash
Washing Washing
Mode
Quick
Wash
Stain
X
On/Off
Removal
Pre Soak
On/Off
o
Off,
Z
Signal Continuous,
Max
Child lock On/Off
used
Settings