Calibrate Temperature; Voltage; Showroom Program; Demo Mode - Miele H6560BP Operating And Installation Instructions

Calibrate temperature

Using temperature calibration the
temperature can be modified, in all
modes and MasterChef programs, so
that it is slightly higher or lower than
shown.
The temperature calibration is
represented by a bar with seven
segments.
If all of the segments are filled the oven
temperature is much higher than
indicated in the display. If no segment
is filled the oven temperature is much
lower than indicated.
Select or , to adjust the
temperature calibration.
Confirm with OK.

Voltage

Setting the voltage (electrical version)
Select the desired voltage and
corresponding frequency.
Confirm with OK.

Showroom program

This function enables the oven to be
demonstrated in showrooms without
heating up. It should not be set for
domestic use.

Demo Mode

If you have demo mode activated
will appear when you turn on
the oven.
–
Press and hold OK for at least 4
seconds to activate demo mode.
–
Press and hold OK for at least 4
seconds to deactivate demo mode.
The oven can then be used as
normal.

Factory default

–
Any settings that have been altered
will be reset to the factory default
setting.
–
All Favorites will be deleted.
–
Any default temperatures that have
been changed will reset to the
factory default settings.
Settings
39