Miele H6560BP Operating And Installation Instructions page 92

Frequently asked questions
Problem
The oven does not heat
up.
appears in the
display.
appears in the
display.
appears in the
display.
appears
in the display.
in the display.
appears in
the display.
The core temperature
cannot be set.
92
Possible cause and solution
Demo mode is activated.
The oven can be operated but will not heat up.
Deactivate Demo mode (see "Settings –
Showroom Program").
There has been a power failure which has caused the
current cooking process to stop.
Turn the oven off and then back on again.
Restart the cooking process.
The power supply was interrupted for longer than 200
hours.
Reset the date and time.
The oven was operated for an unusually long period
of time. The Safety cut-out feature has been
activated.
Confirm with OK. Clear the message
The oven is now ready to use.
The Self Cleaning program door lock is not locking.
Turn the oven off and then back on again. Then
restart the Self Clean program.
If the message appears again, contact Miele
Technical Service.
appears The door lock for the Self Clean program will not
deactivate.
Turn the oven off and then back on again.
If the door lock still does not deactivate itself,
contact Miele.
A fault has occurred that you cannot resolve.
Contact Miele.
The roast probe is not recognized by the oven.
Check whether the roast probe is correctly
plugged into the socket.
If the oven still does not recognize the roast probe, it
must be faulty. A replacement roast probe can be
ordered from Miele.
by selecting "Back".