Honda 08E91-T2A-100 Installation Instructions Manual page 8

23. Remove the driver's front door sill trim.
2 RETAINING TABS
24. Pull away the driver's door opening seal, and remove
the driver's kick panel.
DRIVER'S DOOR
OPENING SEAL
(Pull away.)
8 of 35
DRIVER'S
FRONT DOOR
SILL TRIM
3 CLIPS
2 HOOKS
Q0D2801AD
2 CLIPS
DRIVER'S KICK
Q0N2030AG
PANEL
Installing the Antenna
25. Using scissors, cut one urethane tape in half. Wrap
two halves of urethane tape to the antenna cable as
shown.
60 mm
(2.4 in.)
URETHANE TAPE
(Cut in half.)
AII 00273 (1410)
ANTENNA
60 mm
(2.4 in.)
ANTENNA
CABLE
HALVES OF
URETHANE TAPE
(Do not fold
the antenna cable.)
© 2014 American Honda Motor Co., Inc. – All Rights Reserved.
SECTION
VIEW
QB62501BK