Honda 08E91-T2A-100 Installation Instructions Manual page 25

84. Align the white tape on the engine starter harness
with the vehicle clip, and secure the engine starter
harness to the vehicle harness with two wire ties.
NOTE: Move the steering wheel up and down
through its full adjustment range and make sure the
connectors and harness are not being stretched.
Make sure that the engine starter harness is not
interfering with the vehicle parts.
Do not undue strain to the
12-pin connector cord.
2 WIRE TIES
© 2014 American Honda Motor Co., Inc. – All Rights Reserved.
VEHICLE
VEHICLE
HARNESS
CLIP
WHITE
TAPE
ENGINE STARTER
HARNESS
QD22115BY
85. Route the antenna cable along the engine starter
harness as shown.
WIRE
TIE
FRONT
ANTENNA
CABLE
VEHICLE
HARNESS
FUSE
BOX
86. Secure the antenna cable to the engine starter
harness with two wire ties.
87. Loosely secure the antenna cable to the dashboard
with one wire tie loosely installed in step 76.
AII 00273 (1410)
ENGINE STARTER
HARNESS
ANTENNA
CABLE
LEFT KNEE
BOLSTER WIRE TIE
(Loosely secure.)
WIRE
TIE
DASHBOARD
QD90227AG
25 of 35