Honda 08E91-T2A-100 Installation Instructions Manual page 15

48. Using isopropyl alcohol on a shop towel, clean the
area where the urethane tapes will attach.
Clean with
URETHANE
isopropyl
TAPE
alcohol.
(Cut.)
49. Using scissors, cut one urethane tape into three
pieces, and attach them to the left knee bolster as
shown.
© 2014 American Honda Motor Co., Inc. – All Rights Reserved.
2 URETHANE
TAPES
FRONT
LEFT KNEE
Align.
BOLSTER
QD62415AB
AII 00273 (1410)
50. Using scissors, cut the urethane tape as shown.
Wrap the cut urethane tape around the engine
starter harness 5-pin connector.
ENGINE
STARTER
HARNESS
5-PIN
CONNECTOR
20 mm
(0.8 in.)
URETHANE
TAPE
URETHANE SIDE VIEW
FUSE
BOX
ENGINE STARTER
HARNESS
5-PIN CONNECTOR
25 mm
(1.0 in.)
QD90211AG
15 of 35