10. Remove the remaining upper clip from the driver's
A-pillar.
Push 2 tabs.
DRIVER'S
A-PILLAR
11. Temporarily reinstall the driver's A-pillar trim, and
check the overlap between the headliner and the
driver's A-pillar trim according to the service manual.
Remove the driver's A-pillar trim. Install the new clip
(supplied) to the driver's A-pillar trim.
NEW CLIP
© 2014 American Honda Motor Co., Inc. – All Rights Reserved.
12. Remove the driver's dashboard panel.
UPPER CLIP
(Discard.)
Q0N2017AG
13. Remove the driver's air outlet.
DRIVER'S
A-PILLAR TRIM
(inside)
Q0N2018AG
AII 00273 (1410)
VEHICLE
CONNECTOR
SLOT
6 CLIPS
DRIVER'S
AIR OUTLET
CLIP
DRIVER'S
DASHBOARD
PANEL
Q0N2019BG
2 CLIPS
RETAIN-
ING
TAB
SELF-TAPPING
SCREW
Q0N2020BG
5 of 35