Connecting The Headset; Battery Charging - Gigaset C610a User Manual

First steps
Display in idle status
Once the phone is registered and the time set, the idle display is shown as in this
example. If the answering machine is activated, the answering machine icon
will be displayed in the header.
Displays
u
Reception signal between the base and handset:
– good to poor: Ð i Ñ Ò
– no reception: |
Green: Eco Mode activated (
u
Battery charge status:
– { white: charged over 66%
– { white: charged between 34% and 66%
– y white: charged between 11% and 33%
– y red: charged below 11%
– y flashes red: battery almost empty (less than 10-minutes talktime)
– xy xy x{ x{ white: battery charging
Have you chosen a color scheme with white background, the white symbols are
displayed in black.
u
INT 1
Internal name of the handset (
If Eco Mode+ (
Your answering machine is set with a pre-recorded announcement.
Your phone is now ready for use!

Connecting the headset

18
Please note
¢
page 57) is activated, the ¼ icon is displayed in the top left.
You can connect a headset with a 2.5 mm jack connector.
See the relevant product page at www.gigaset.com for
information on recommended headsets.
¢
page 57)
¢
page 61)
Ã
i à V
07:15
INT 1 14 Oct
Calls SMS