Activating/Deactivating Advisory Tones; Setting Your Own Area Code - Gigaset C610a User Manual

Activating/deactivating the alert
tone
In place of the ringtone you can activate an
alert tone. When you receive a call, you will
hear a short tone ("Beep") instead of the
ringtone.
*
Press and hold the star key and
within 3 seconds:
§Beep§
Press the display key. A call will
now be signalled by one short
alert tone.
The ñ icon appears in the dis-
play.
•
Activating/deactivating
advisory tones
Your handset uses advisory tones to tell you
about different activities and statuses. The
following advisory tones can be activated/
deactivated independently of each other:
u
Key click: every key press is confirmed.
u
Acknowledge tones:
– Confirmation tone (ascending tone
sequence): at the end of an entry/set-
ting and when an SMS or a new entry
arrives in the answering machine list
or call list
– Error tone (descending tone
sequence): when you make an incor-
rect entry
– Menu end tone: when scrolling to the
end of a menu
u
Battery low beep: the battery requires
charging.
In idle status:
Ï
¢ ¢
v
Audio Settings
¢
Advisory Tones
¤
Change multiple line input:
Key Tones:
Select On or Off.
Confirmation:
Select On or Off.
Battery:
Select On or Off.
§Save§
Press the display key.
Please note
You can also set the call volume, the ring-
tones and the advisory tones via the
¢
menu ( page 27).
•
Setting your own area
code
In order to transfer phone numbers (e.g. in
vCards), it is essential that your area code
(international and local area code) is saved
on the phone.
Some of these numbers are already preset.
Ï
¢ ¢
v
Telephony
Check that the (pre)set area code is correct.
¤
Change multiple line input:
q
Select/change input field.
r
Navigate in the input field.
Ñ
If necessary, delete number:
press the display key.
~
Enter number.
§Save§
Press the display key.
Example:
Area Codes
International code:
00 - 49
Local area code:
0 - [ ]
Û
Save
Handset settings
¢
Area Codes
67