Record Mode - Uniden iGO CAM 850 Owner's Manual

Record Mode

To record a video, ensure that a valid micro SD card is inserted
in the given slot.
NOTE
Using the iGO CAM 850 you can record videos and take photos. To record
videos, you need to ensure that the unit is in the Record mode.
Press MODE to switch between Record, Photo and Playback modes.
Press the UP button to switch from Loop Recording to Auto Detect (Motion
Detection).
When the recording has been set to Auto Detect mode, the
display on the LCD.
Recording
The unit can record from either one or both cameras. To record from CAM
A or CAM B or both ensure that the B/R switch (bottom of the unit) is at B.
To record from CAM A and Reverse Camera or only from Reverse Camera
insert the Reverse camera plug into AV IN port and ensure that the B/R
switch is at R.
The camera resolution is as shown below. Note: The Reverse camera can
record only with CAM A.
Resolution
Resolution
When connected to a car charger, the unit automatically starts recording, the
icon will start flashing on the screen. To stop recording, press OK and
icon will stop flashing indicating that the recording has stopped.
UNIDEN iGO CAM 850
CAM A
1080P
720P
VGA
CAM A
1080P
720P
VGA
10
icon will
CAM B
1080P
720P
VGA
Reverse Camera
VGA
Vehicle Recorder