LED
5
6
CAM B
7
UP
8
DOWN
9
Power
10
GPS Port
11
AV IN
12
OK
13
B/R
14
USB/DC IN
15
HDMI
16
Micro SD Card
Slot
17
Reset
UNIDEN iGO CAM 850
•
glows red when the unit is powered on.
Camera B Lens
•
In Menu list, move the cursor, one line up.
•
In the Record mode, stop recording and switch
between loop recording and auto detect (motion
detection).
•
In Menu list, move the cursor, one line down.
•
Use this button to change the LCD screen
display.
Press and hold to either switch on or off the unit.
Press to turn on/off/auto set the night vision.
Use to connect the external GPS antenna
(included).
Connect to the Reverse Camera.
•
In Record mode, press this button to start or stop
video recording.
•
In Photo mode, press this button to take a photo.
•
Press to confirm a selection in the Menu.
•
Press to confirm a change in the settings.
•
Press and hold to turn on/off the LCD, when the
unit is powered on.
Insert the Reverse Camera in the AV IN port,
and then use this switch to change the recording
from CAM A and CAM B to CAM A and Reverse
camera.
•
Connect to External Power & charge battery.
•
Connect to PC for data (SD card) transfer.
Connect to a HDMI cable.
Use this slot to insert the micro SD card.
If the device fails to operate properly, try resetting
the device. Press the reset button by using a fine
pen or paperclip.
6
Vehicle Recorder