Important Safety Instructions Uniden does not represent this product to be waterproof. Do not expose this product to Rain or Moisture. NOTE This product is intended for use in a motor vehicle. Don’t install the device where it will block the driver’s view of the road (including the mirrors!) or the deployment of the airbag.
Plug it in, Power On/Off ..................9 Record Mode ...................... 10 Photo Mode ......................12 Playback Mode ....................13 Connecting to a PC ..................14 iGO CAM Player ....................14 Important Information ..................17 Warranty ................18 UNIDEN iGO CAM 850 Vehicle Recorder...
If any item is missing or damaged, contact your place of purchase immediately. Never use damaged products! • Need help? Get answers at our website: www.uniden.com.au for Australian model. www.uniden.co.nz for New Zealand model. UNIDEN iGO CAM 850 Vehicle Recorder...
Camera A Lens MENU In standby, open the Menu MODE Use this button to switch between various modes - Record, Photo and Playback When the unit is recording, press this button to manually lock the files. Records sound Microphone UNIDEN iGO CAM 850 Vehicle Recorder...
Page 6
Connect to PC for data (SD card) transfer. Connect to a HDMI cable. HDMI Micro SD Card Use this slot to insert the micro SD card. Slot Reset If the device fails to operate properly, try resetting the device. Press the reset button by using a fine pen or paperclip. UNIDEN iGO CAM 850 Vehicle Recorder...
It maybe a good idea to secure the power cord with cable clips so that it does not interfere while driving. Suction cups will not stick well on a curved/textured or wet surfaces. NOTE UNIDEN iGO CAM 850 Vehicle Recorder...
It is important to format the micro SD card before using it, so as to avoid any damage to the files created on iGO CAM 850. Uniden recommends using good quality micro SD cards. Battery Information Although primarily designed for in-car use, the unit can operate from its built- in 600mAh battery for up to 15 minutes.
At other times, press and hold the POWER button to turn it on or off. When the GPS antenna is fi tted into the unit icon will display on the When the GPS antenna is fi tted into the unit icon will display on the LCD. When the Reverse camera is fi tted into the unit icon will display on the LCD. Only use the DC car adaptor that comes with your device. Any other adaptor might damage the device. NOTE UNIDEN iGO CAM 850 Vehicle Recorder...
NOTE Using the iGO CAM 850 you can record videos and take photos. To record videos, you need to ensure that the unit is in the Record mode. Press MODE to switch between Record, Photo and Playback modes.
Page 11
Recordings are stored as video clips, which can be played back as a continuous recording or as individual clips. Use this option to set the length of each video clip. If you choose the option ‘Off’ then the recorder will not loop record and the fi les will not be overwritten on the micro SD card. UNIDEN iGO CAM 850 Vehicle Recorder...
Enable or disable the recorder to shut down when idle. Key Tone Have the keys sound a tone when you press them. LCD Standby Set to automatically turn off the LCD after the recording starts. UNIDEN iGO CAM 850 Vehicle Recorder...
Delete the recordings/images on the SD card. • Format Format the SD card. Volume Press MENU to switch to the Volume Setting. Use the options to adjust the volume of the recordings, when it is played back. UNIDEN iGO CAM 850 Vehicle Recorder...
Connecting to a PC The iGO CAM 850 can be connected to a PC (plug the USB cable (not supplied) into the DC IN port). When the unit is connected to a PC, three options are displayed on the unit’s screen;...
Page 15
1. Start the iGO CAM Player (i.e., double click on the iGO CAM Player icon). Screen Video Playback Screen Storage space Video les Compass Playback Controls Image les Folder icon Volume Speed Ensure that the PC is connected to the internet to view the map screen. UNIDEN iGO CAM 850 Vehicle Recorder...
Page 16
2. Click on the Folder icon (in the Video Files section, as shown in the image above) to open the ‘Select Media Files’ window. Choose a file that has been recorded on the iGO CAM 850 (saved on the PC/from the SD card) and click on the tick icon at the bottom of the window to import the files on to the iGO CAM Player. 3. Once the recorded file has been imported on the iGO CAM Player, select the file and then click on the PLAY button (Playback Controls) to start playback.
This is due to the light frequency. image Change the light frequency depending on the local power supply. The unit crashes Press and hold the ‘Reset’ button, with a pin, to reset the unit. UNIDEN iGO CAM 850 Vehicle Recorder...
Terms of Warranty: Uniden Aust/NZ warrants to the original retail purchaser only that the iGO CAM 850 (“the Product”), will be free from defects in materials and craftsmanship for the duration of the warranty period, subject to the limitations and exclusions set out below.
Page 19
(such as a legible copy of the sales docket) to Uniden at the addresses shown below. You should contact Uniden regarding any compensation that may be payable for your expenses incurred in making a warranty claim. Prior to delivery, we recommend that you make a backup copy of any phone numbers, images or other data stored on your Product, in case it is lost or damaged during warranty service.
Need help?
Do you have a question about the iGO CAM 850 and is the answer not in the manual?
Questions and answers