Do you have a question about the iGO CAM 800 and is the answer not in the manual?
Questions and answers
Gary Shanahan
February 7, 2025
The suction cup on my cam 800 has gone hard and does not adhere to the windscreen.I was wondering if there was a replacement part available other wise camera goes great.
Important Safety Instructions Uniden does not represent this product to be waterproof. Do not expose this product to Rain or Moisture. NOTE This product is intended for use in a motor vehicle. Don’t install the device where it will block the driver’s view of the road (including the mirrors!) or the deployment of the airbag.
SD Card ........................8 Plug it in, Power On/Off ................... 8 Video Mode ....................... 10 Photo Mode ....................... 14 Playback Mode ....................16 Connecting to a PC ..................16 Important Information ................... 17 Warranty ................18 UNIDEN iGO CAM 800 Vehicle Recorder...
If any item is missing or damaged, contact your place of purchase immediately. Never use damaged products! • Need help? Get answers at our website: www.uniden.com.au for Australian model. www.uniden.co.nz for New Zealand model. UNIDEN iGO CAM 800 Vehicle Recorder...
Video, Photo and Playback Left - glows red when the unit is charging Right - glows red when the unit is powered on In the Video mode, use this button to lock/save (from overwrite) the current recording. UNIDEN iGO CAM 800 Vehicle Recorder...
Page 6
DC IN Connect External Power & charge battery • Connect to PC for data (SD card) transfer Connects to an external device AV Out Fit the bracket hook of the windshield mount Bracket Slot UNIDEN iGO CAM 800 Vehicle Recorder...
It maybe a good idea to secure the power cord with cable clips so that it does not interfere while driving. Suction cups will not stick well on a curved/textured or wet surfaces. NOTE UNIDEN iGO CAM 800 Vehicle Recorder...
Power button to turn it on or off. Power button to turn it on or off. Only use the DC car adaptor that comes with your device. Any other adaptor might damage the device. NOTE UNIDEN iGO CAM 800 Vehicle Recorder...
Page 9
The unit will take about 2 hours to charge completely. Battery Alert The image given below indicates the battery level at different stages. Empty Full Half full UNIDEN iGO CAM 800 Vehicle Recorder...
Also note, that inserting/removing the SD card causes the device to shutdown. NOTE Using the iGO CAM 800 you can record videos and take photos. To record videos, you need to ensure that the unit is in the video mode. Recording When connected to a car charger, the unit automatically starts recording, the Video icon will start flashing on the screen.
Page 11
This settings has the following options- Auto/Sunlight/Fluorescence/ Cloudysky/Tungsten. Choose any one of the option to define the condition for the recordings. • Exposal This setting allows you to set the brightness of the video. The options available range from -3 to +3. The default setting is 0. UNIDEN iGO CAM 800 Vehicle Recorder...
Page 12
Choose the options -1min/3min/5min/Off - given here to set the time gap for the unit to shutdown, if there is no activity. • Key Tone Turn on this setting to have the buttons on the unit sound a tone when you press them. UNIDEN iGO CAM 800 Vehicle Recorder...
Page 13
Use the UP/DOWN keys to increase or decrease the figures. Press OK to confirm. • Format Use this setting to format the SD card. • Default Set Use this option to change all the settings to the default factory settings. UNIDEN iGO CAM 800 Vehicle Recorder...
-3 to +3. The default setting is 0. • Colour You can choose between the available options - Null/Black and White/ Negative/Ancient/Light Blue - for the background setting of the images. • Water Mark If you want the date and time displayed on the image files, then turn on this setting. UNIDEN iGO CAM 800 Vehicle Recorder...
Page 15
Use the UP/DOWN keys to increase or decrease the figures. Press OK to confirm. • Format Use this setting to format the SD card. • Default Set Use this option to change all the settings to the default factory settings. UNIDEN iGO CAM 800 Vehicle Recorder...
Connecting to a PC The iGO CAM 800 can be connected to a PC (using the supplied USB cable). When the unit is connected to the PC, the following options - USB_Disk, PC_ Camera and REC_mode - are displayed on the unit’s screen.
This is due to the light frequency. image Change the light frequency depending on the local power supply. The unit crashes Press and hold the ‘Reset’ button, with a pin, to restart the unit. UNIDEN iGO CAM 800 Vehicle Recorder...
Terms of Warranty: Uniden Aust/NZ warrants to the original retail purchaser only that the iGO CAM 800 (“the Product”), will be free from defects in materials and craftsmanship for the duration of the warranty period, subject to the limitations and exclusions set out below.
Page 19
Product, together with satisfactory evidence of your original purchase (such as a legible copy of the sales docket) to Uniden at the addresses shown below. You should contact Uniden regarding any compensation that may be payable for your expenses incurred in making a warranty claim.
Need help?
Do you have a question about the iGO CAM 800 and is the answer not in the manual?
Questions and answers
The suction cup on my cam 800 has gone hard and does not adhere to the windscreen.I was wondering if there was a replacement part available other wise camera goes great.