Cautions In Using This Product - MUTOH VJ-426UF Startup Manual

Installation environment conditions
Install the product in an environment that satisfies the conditions in the table below.
Power supply
specifications
Environmental
conditions

Cautions in using this product

When opening and closing the front cover
Do not open or close the front cover if you are not in a balanced posture.
WARNING
If you open or close it in an unbalanced posture, your hands or other body parts could get caught in
it, possibly resulting in serious injury.
CAUTION
Voltage
Frequency
Capacity
Operating environment
Ranges to ensure printing
precision
Environment for storage
• Always close the front cover fully.
If you leave it part-open, it could close suddenly.
• When closing the front cover, always use both hands and hold it by the portions specified.
Do not place your fingers on the edges of the printer's opening portion, or on any parts around those edges.
Your fingers could get caught and be injured.
AC 100 V to 120 V ±10 % or 200 V to 240 V ±10 %
50/60 Hz ±1 Hz
No less than 10 A
Temperature 20 to 32 °C, humidity 40 to 60 %,
no condensation.
Temperature 22 to 30 °C, humidity 40 to 60 %,
no condensation.
• If not charged with ink when stored: up to 6 months
Temperature -20 to +60 °C, humidity 20 to 80 %.
• If charged with ink when stored: up to 1 week*
Temperature -10 to +40 °C, humidity 20 to 80 %.
*Up to 4 days if the ambient temperature is 32 °C or higher.
Always hold the cover by the places shown in the picture, using both
hands, and close it slowly.
Unpacking 5