Switching On And Off - Miele CM 5000 Operating Instructions Manual

Switching on and off

You can use the On/Off button -
(standby) to switch the coffee machine
on and off, if the master switch at the
back of the machine is switched on.
Switching on
When the On/Off button - is pressed,
the coffee machine will heat up and the
pipework will be rinsed through. This
cleans and heats the pipework ready
for coffee preparation. After rinsing, hot
water will run into the drip tray.
If the coffee machine still has an
operating temperature which is higher
than 60 °C, then rinsing will not take
place.
^ Press the On/Off button -.
The following will appear in the display:
HEATING-UP PHASE
If automatic rinsing has been activated,
then the following will appear in the
display after the heating-up phase:
RINSING
Hot water will be dispensed from the
coffee spouts.
The main menu will then appear:
SELECT TYPE OF DRINK
You can now prepare coffee or
espresso.
18
Switching off
^ Press the On/Off button -.
If the automatic rinsing function has
been switched on, the pipework will be
rinsed through before the coffee
machine switches itself off.
If you have switched the automatic
rinsing function off, you should rinse the
pipework manually (see "Cleaning and
care") before switching the coffee
machine off.
TIP To save energy, use the master
switch at the back of the coffee
machine to switch it off if it is not going
to be used for a long period of time,
e.g. during holidays.
Please note that the time of day will not
be saved and must be entered again
the next time the coffee machine is
switched on.